Hollywood FL Electrician & AC Repair

Install customer supplied switch

Gave estimate to reinstall circuit that may be compromised by floor

Supply and install (1) surge protector for whole house

1)-----Remove and replace outlet in living room. Ensure that power supply and grounding is correct. 2)-----Remove and replace outlet in kitchen. Ensure that power supply and grounding is correct. Also fasten box securely in the wall. 3)------Remove and replace GFI outlet in kitchen.

Hang small chandelier Install customer supplied switch

Replace old ballasts and lamps in street light poles.

1) Cut 6 4 inch holes at desired location of hi hat lights to be installed. 2) Run line or reroute exisitng line from exisitng switch to first location of lights. 3) Run line between each of the 6 holes cut. 4) Supply and install 6 4 inch LED hi hats.m

Supply and install new electrical panel and meter service 200-amp Replace riser with new weather-head. New grounding system.

1) Remove TV and bracket from wall. 2) Remove 5 outlets. 3) Move cable outlet over 2 ft. 4) Rough patch holes.

Locate and repair issues with short circuit

1) Remove 100 amp meter can/riser and main fused disconnect with a/c disconnect that is double tapped to main disconnect. 2) Replace with new 200 amp 8/16 circuit meter/main combo paneland route A/C circuit into new panel. 3) Install 2 inch riser with weather head and #2/0 copper feeders. 4) Install 100 amp breaker and connect house panel to breaker. 5) Install new grounding system which requires 2 ground rods, 1 water pipe ground, 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 6) Remove 100 amp main lug indoor circuit panel. 7) Replace with new 100 amp 20/40 circuit main lug panel. 8) Label,rough patch and clean. 9) PULL EMERGENCY PERMIT AND GET INSPECTION.

1) Remove old 150 amp main lug circuit panel. 2) Replace with new 150 amp GE 20/40 circuit mainlug panel. 3) Label, rough patch and clean. 4) Pull 40 amp line to newly installed install hot. 5) Install 40 amp breaker and rewire insta hot to new power supply.

1) Run line from existing 3 way switch to other switch in 3 way system to feed recently added outlet in kitchen.

1) Remove 125 amp indoor 20/40 main lug circuit panel. 2) Replace with new 125 amp GE brand indoor 20/40 circuit main lug circuit panel. 3) Label,rough patch and clean. PULL PERMIT AND GET INSPECTION- DEPOSIT: $1150.00 BALANCE: $1150.00

Install customer supplied deluxe fixture

Remove temporary hook up and install correct wiring for water heater

Replaced 60 amp A.C. breaker.

Electrician rewired the disposal switch and connected the under cabinet lighting to a switch.

Electrician installed new post lights in backyard.

Diagnosed power issue with track lighting in office space and corrected the problem.

Licensed electrician installed a new seimens 150 amp main breaker and a surge protector.

Electrician installed post lights in backyard and front yard as well as an indoor time clock to control the post light in the front yard.

Electrician replaced ten low voltage halogen light bulbs.

Electrician provided estimate to replace electrical panel.