Kings Electrical and Air Conditioning promises customer service that exceeds the expectations of Tamarac FL residents.
Call us now at: 954-753-9436. We’d love the opportunity to earn your business as we have with your neighbors in Tamarac FL.
Local Reviews
for Tamarac, FL
Powered by Nearby NowOur Reviews by City
Great Service. Very professional electricians.
Beverly - Tamarac, FL
Nick and Miguel were very professional and knowledgeable. I will definitely use Kings again when the need arises.
Great service and great professional doing the job!
O'Rourke - Tamarac, FL
The new light looks phenomenal!
Durnil - Tamarac, FL
Nick did a great job!!!!!
Terrific service, terrific work and a very fair price.
Mellgren - Tamarac, FL
I would recommend this company to any and everyone.
very professional great pricing they will work with you they are definitely team playing peopleI love these guys
Gil - Tamarac, FL
I'm always going to use these guys because I trust their work
Good Service, but a High Price
Jessica - Tamarac, FL
Great job.
Joe - Tamarac, FL
Your company was professionally represented by Lucas.
Glad I called Kings.
Ted - Tamarac, FL
Needed an electrician on short notice. I knew of no one in the industry so I took a chance and called Kings based on their online reviews. Very glad I did. Service was fast and very professional, which is rare in South Florida. Really glad I found this company and will definitely use them in the future.
Great service.
Joanne - Tamarac, FL
Nick did a thorough job, but we felt the service is pricey
On time , great service.
Gil - Tamarac, FL
Well this is the only service i trust to send to my parents. The have been honest and on time , real pros
Good service
Micky - Tamarac, FL
Good service, price was too high. They came same day which was great
unbelievable, fix my problem and didn't hurt my pocketbook
Linda - Tamarac, FL
I cannot tell you how dismayed I was when the only outlet in my dressing area was broken. I couldn't use my blow dryer or cosmetic Mira, and at my age I need it because I'm half blind. The handyman in my building said there was no way it could be fixed , and set up a crazy type of system on my switches, which wasn't useful for me because it was next to the sink. He told me, don't go to one electrician, all they will do is come and take their fee for looking at the problem, and then tell you they can't fix it,and if they can they will charge you an arm and a leg and rip up your walls. I called King electronics and spoke to a lovely woman named Lauren who calmed my fears and said, don't worry,we can fix it. I was a little apprehensive, but I said okay, because I was desperate, and she was so convincing, understanding, concerned , she was easy to speak to. John Gallina, from King came to my condo. Within a half an hour imy problems were solved. Everything was completely fixed and ready to be used. John was polite, and precise,nothing was out of order, he even had booties on not to ruin my floors, you women must know what I'm talking about. He knew the problem immediately and fix it. I am so satisfied with King electronics I will use them for any other electrical problems and readily recommend them, because they walked the walk, Not just talked the talk. Believe me when I say, I got them out of the Internet. I never met any of them previously. I'm just a very satisfied customer
great service, knowledgeable,personable
Lynn - Tamarac, FL
erik was efficient and very mice to work with. would request him again
Very knowledgeable and professional
eileen - Tamarac, FL
When my Insurance Company told me I had to re-wire my old aluminum wiring to copper in my house I was in a panic. I called many electricians before choosing Kings Electric. Kings knew exactly what the Insurance Company would accept, explained everything to me and their pricing was very fair. I would definitely recommend them. They were a pleasure to work with.
Nick G.
1)——Remove bad outlet and wiring at hot water heater.2)——Hardwire hot water heater to water heater circuit.
Nick G.
1)——Replace twin 20 amp breaker.
Nick G.
1)——Supply and Install Approximately 30 alumicons attached to all single strand aluminum circuits at indoor circuit panel.2)——Install alumicons at all single strand aluminum wired devices.(23 devices)
Nick G.
1)——Run dedicated 15 amp circuit from panel to 4 locations. (By garage entry door, inside each bedroom and outside each bedroom.)2)—-Install junction box and and hardwired smoke detectors with 10 year lithium battery back up at each location.(Garage entry door will require carbon/smoke combo)
Jason B.
Hook up Cubicle
Jason B.
Clear drain line clogged causing no power to nest thermostat
Jason B.
Supply and install 30 amp generator outlet below the outdoor panel
Nick G.
1)——Run dedicated 20amp small appliance cirucit from panel to 2 locations on kitchen counter top location.2)——Install new 20 amp GFI and 20 amp standard outlet with cover plates.3)——Run dedicated 20 amp small appliance cirucit from panel to dining room outlet location.4)——Install new 20 amp standard outlet.5)——Remove Approximately 45 devices including; Standard outlets, GFIs , switches and dimmers.6)——Convert all wiring at devices to copper using alumicon connectors and install new devices at each location.7)——Repair burnt wiring in master bedroom.
Nick G.
1)——Remove outdoor 150 amp main breaker panel and double tapped sprinkler sub panel. 2)——Install junction box at main feeder conduit going into indoor panel and extend feeder wires to right side of meter so panel can be installed properly. (No room for panel installation on left side of meter) 3)——Install 150 amp outdoor 8/16 circuit main breaker panel. 4)——Reroute sprinkler and general outlet circuit into new main breaker panel. 5)——Update Grounding: Install 2 new ground rods, 1 water pipe ground and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 6)——Install whole home surge protector. 7)——Remove indoor 150 amp main lug circuit panel. 8)——Install new 150 amp indoor main lug 40 circuit panel. 9)——Extend all aluminum circuits with copper wire using alumicon connectors. (Approximately 38 wires) 10)——Label both panels, rough patch and clean area.
Earl C.
Install customer supplied ceiling fan. Install 5 customer supplied exterior wall sconces.
Jason B.
Remove existing outlet box and move over 6 in and install new cut in box with cover plate
Nick G.
1)——Troubleshoot AC compressor circuit to find electrical issue.FOUND: Short circuit at disconnect and bad disconnect.2)——Remove disconnect and cut flexible conduit back to get enough good wire to connect to new disconnect.3)——Install new 60 amp non fusible pull out disconnect.
Nick G.
1)——Remove post light fixture.2)——Supply and install new post light fixture.3)——Replace photocell.
Earl C.
Replace GFI outlet in kitchen and repair kitchen light
Phil G.
Dropped off permit
Phil G.
Dropped off permit
Phil G.
Dropped off permit
Phil G.
Dropped off permit
Phil G.
Dropped off permit
Phil G.
Dropped off permit
Jason B.
Replace (2) customer supplied ceiling fan In (1) new UL ceiling amp box Replace (1) fixture customer supplied
Jason B.
Ceiling fan installation
Earl C.
Replaced bathroom overhead light with brighter LED light fixture. Removed box around old light
Nick G.
Replace existing obsolete electrical panel with new code compliant circuit breaker panel.Correct single strand aluminum wires, to comply with inspection.Permits and inspections included.
Nick G.
Remove exisitng light fixtures from stairwells.Supply and Install 8 ceiling mount 100 watt equivalent LED fixtures.Supply and install 100 watt equivalent wall packs.