Delray Beach FL Electrician & AC Repair

Warranty call: malfunction smoke detector, replace new one

KITCHEN- 1)——Run 3 wire switch line from existing switch box to desired location of fan. 2)——Install fan rated box and fan/light switch combo. 3)——Install customer supplied fan. 4)——Run switch line from existing switch box to 6 locations for LED lighting. 5)——Supply and Install 6 6inch round cut in remodel LED fixtures. 6)——Supply and Install 4 white GFI outlets, 1 standard white outlet and 4 white switches. 7)——Extend circuit of outlet below TV to right behind TV and add outlet. 8)——Seal space around dishwasher/disposal outlet. MASTER BEDROOM AND GUEST BEDROOMS- 1)——Run 3 wire switch line from existing switch box in each bedroom to fan location. 2)——Remove 3 existing fans and install 2 new customer supplied fans in guest bedrooms and reinstall existing master bedroom fan. 3)——Install fan/light switch combos at each location for a total of 3. COACH LIGHTING- 1)——Run switch line from existing power source in garage to 2 locat

Warranty

Install (1) customer supplied fixture at front garage (No existing electric) Install (1) customer supplied fixture in back of home (existing electric)

Replace (1) smoke detector battery operated

Supply and install 50amp Generator outlet Supply and install new 50amp GE breaker in panel Supply and install 50 amp Generator Cord for new hookup Supply and install Interlock clip on Main Breaker Indoor Panel

Drain line clogged, evaporator so dirty causing the problem. Recommend have service contract to maintenance AC systems properly

1)——Remove and replace kitchen GFI.

Replace (1) GFCI 15 amps breaker Install 2 outlets in bathrooms

Remove existing burnout panel and breakers Supply and install (1) 150 amps indoor panel Permit fee will be passed through customer if needed

Diagnosis and repair lights flickering Replace (2) breakers Highly recommend replace indoor panel Total amount will be credit back if Kings replace the panel

Install new switch.

Dispatch waived. Work cant be physically done.

Electric panel replacement

Replace (1) regular outlet for disposal and dishwasher

1)----Remove 125 amp main lug indoor circuit panel. 2)----Install new 125 amp 16/32 circuit main lug indoor panel. 3)----Label, rough patch and clean area.

Install switch

Supply and install new 2G outdoor switch box Install (2) new 240 switches Install new outlet box above new box

Supply and install (3) LED in garage

1)-----Remove and replace bathroom flourescent light T8 3 bulb ballast.

1)----Remove exsitng GFI outlet and bubble cover. 2)----Replace GFI with new weather resistant GFI and in use weather resistant bubble cover. 3)----Remove low voltage landscape lighting transformer/timer. 4)----Replace with new stainless steel 300 watt landscape lighting transformer/timer. 5)----Remove and replace 5 customer supplied landscape lights.

KITCHEN- 1)-----Troubleshoot kitchen lighting to see why lights are flickering. Probably needs LED dimmer or setting on dimmer is incorrect. COST FOR DIMMER:$150 FOYER- 1)-----Troubleshoot/Trace out 4 switches. Also rewire 3 way to operate foyer light correctly. 2)-----Troubleshoot coach/landscape lighting switching. Get lights to switch from front door location. 3)-----Will either have to rewire switch line at switch box or run new switch line from timeclock in garage. COST FOR TROUBLESHOOT SWITCHES/REWIRE 3 WAY:$350 COST FOR REWIRE COACH/LANDSCAPE SWITCH LINE:$350 OPTIONAL: COST FOR NEW SWITCH LINE TO COACH/LANDSCAPE LIGHTS:$975 DEN- 1)-----Remove exsitng toggle switch and install LED dimmer. COST FOR DIMMER:$150 MASTER BEDROOM/HALL- 1)------Relocate switch line for half switched outlets from exsiting location to desired location in master bedroom. 2)------Run switch line from same location to desired location of ceiling light with LED dimmer. 3)-----Install junction bo

Supply and install a total of (7) TV Cable lines Supply and install all required splitters Supply and install wall connections for all new cable lines Supply and install (1) dedicated cable line back to outside connection where Comcast will be connecting their box

Replace (1) 30 amp fusible disconnect

1)-----Go through circuit and check for loose connections, bad devices, and wire touching where they should not be. 2)-----Check wiring in panel for bad connections. 3)-----Will replace any devices and or breakers necessary. 4)-----Fix loose connections and placement of wires touching where necessary.