CALL NOW: 407-476-5159
South Florida and Orlando AC Repair & Electricians

Fort Lauderdale FL Electrician & AC Repair

South FL 954-753-9436 Orlando Area 407-476-5159

Kings Electrical and Air Conditioning promises customer service that exceeds the expectations of Fort Lauderdale FL residents.

Call us now at: 954-753-9436 . We'd love the opportunity to earn your business as we have with your neighbors in Fort Lauderdale FL.

Recent Jobs and Reviews in Fort Lauderdale, FL

Rated 4.8 out of 5 stars based on 42 customer reviews

Fort Lauderdale, FL at a glance

Kings Electric & Air Conditioning (Coral Springs) has completed 25 jobs in Fort Lauderdale, FL between October 2018 and March 2019.

The most recent job was on March 15, 2019.

Kings Electric & Air Conditioning (Coral Springs) completed its first job in Fort Lauderdale, FL in January 2014.

Job Locations and Reviews

Phil G.
Phil G. Checked in
Replace 3 way switch
Fort Lauderdale, FL 33332
Phil G.
Phil G. Checked in
Supply and install new gfci
Fort Lauderdale, FL 33315
Jason B.
Jason B. Checked in
Refrigerant leak test and repair leak. Added refrigerant.
Fort Lauderdale, FL 33309
Nick G.
Nick G. Checked in
1)-----Remove 100 amp meter enclosure, 150 amp outdoor main breaker panel and 200 amp indoor main breaker panel. 2)-----Remove #2 gauge feeder service wires throughout system. 3)-----Remove 2 inch weather head at riser. 4)-----Install new 200 amp meter can, 150 amp outdoor 8/16 circuit main breaker feed through panel and 150 amp 20/40 circuit main lug indoor panel. 5)-----Run new 1/0 gauge copper feeder wires throughout service including through riser up to FPL lines. 6)-----Install new 2 inch weather head at riser. 7)-----Update grounding system: includes 2 ground rods, 1 water pipe ground, and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 8)-----Install whole home surge protector. 9)-----Rough patch, label panels and clean area. 10)----Troubleshoot kitchen circuit. 11)-----Assemble and install 2 customer supplied pendant lights in kitchen.
Fort Lauderdale, FL 33334
Nick G.
Nick G. Checked in
1)-----Remove 100 amp meter enclosure, 150 amp outdoor main breaker panel and 200 amp indoor main breaker panel. 2)-----Remove #2 gauge feeder service wires throughout system. 3)-----Remove 2 inch weather head at riser. 4)-----Install new 200 amp meter can, 150 amp outdoor 8/16 circuit main breaker feed through panel and 150 amp 20/40 circuit main lug indoor panel. 5)-----Run new 1/0 gauge copper feeder wires throughout service including through riser up to FPL lines. 6)-----Install new 2 inch weather head at riser. 7)-----Update grounding system: includes 2 ground rods, 1 water pipe ground, and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 8)-----Install whole home surge protector. 9)-----Rough patch, label panels and clean area. 10)----Troubleshoot kitchen circuit. 11)-----Assemble and install 2 customer supplied pendant lights in kitchen.
Fort Lauderdale, FL 33334
Nick G.
Nick G. Checked in
1)-----Remove 100 amp meter enclosure, 150 amp outdoor main breaker panel and 200 amp indoor main breaker panel. 2)-----Remove #2 gauge feeder service wires throughout system. 3)-----Remove 2 inch weather head at riser. 4)-----Install new 200 amp meter can, 150 amp outdoor 8/16 circuit main breaker feed through panel and 150 amp 20/40 circuit main lug indoor panel. 5)-----Run new 1/0 gauge copper feeder wires throughout service including through riser up to FPL lines. 6)-----Install new 2 inch weather head at riser. 7)-----Update grounding system: includes 2 ground rods, 1 water pipe ground, and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 8)-----Install whole home surge protector. 9)-----Rough patch, label panels and clean area. 10)----Troubleshoot kitchen circuit. 11)-----Assemble and install 2 customer supplied pendant lights in kitchen.
Fort Lauderdale, FL 33334
Nick G.
Nick G. Checked in
1)-----Remove 100 amp meter enclosure, 150 amp outdoor main breaker panel and 200 amp indoor main breaker panel. 2)-----Remove #2 gauge feeder service wires throughout system. 3)-----Remove 2 inch weather head at riser. 4)-----Install new 200 amp meter can, 150 amp outdoor 8/16 circuit main breaker feed through panel and 150 amp 20/40 circuit main lug indoor panel. 5)-----Run new 1/0 gauge copper feeder wires throughout service including through riser up to FPL lines. 6)-----Install new 2 inch weather head at riser. 7)-----Update grounding system: includes 2 ground rods, 1 water pipe ground, and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 8)-----Install whole home surge protector. 9)-----Rough patch, label panels and clean area. 10)----Troubleshoot kitchen circuit. 11)-----Assemble and install 2 customer supplied pendant lights in kitchen.
Fort Lauderdale, FL 33334
Nick G.
Nick G. Checked in
1)-----Remove bad 20 amp breaker from panel in warehouse. 2)----Replace with new 20 amp bolt in breaker. 3)----Open panel in office to check if breakers are connected. ( Found that they are all connected. Do not think panel is powering anything in the building being used because when breakers are turned off nothing powers down. Probably operated something for previous tenants.) 4)-----Upstairs: push wires back into transformer junction box and install cover plates.
Fort Lauderdale, FL 33309
Nick G.
Nick G. Checked in
Run smoke detector dedicated circuit from panel ,tied to exisitng lighting circuit, to first bedroom and install remodel cut in box. Install 5 hardwired and interconnected carbon/smoke detectors with 10 year lithium battery back up.
Fort Lauderdale, FL 33301
John G.
John G. Checked in
New AC
Fort Lauderdale, FL 33311
Phil G.
Phil G. Checked in
Supply and install new 200 Amp outdoor electrical panel
Fort Lauderdale, FL 33312
Jason B.
Jason B. Checked in
125 amps Panel replacement
Fort Lauderdale, FL 33304
Nick G.
Nick G. Checked in
Smokes were workIng
Fort Lauderdale, FL 33311
Nick G.
Nick G. Checked in
1)-----Extend circuit using 14-3 romex from existing smoke detector junction box in guest bedroom to outside of bedrooms. 2)-----Install remodel cut in box. 3)-----Extend circuit to existing smoke detector junction box in master bedroom. 4)-----Supply and install 3 hardwired interconnected carbon/smoke combo detectors with 10 year lithium battery back up.
Fort Lauderdale, FL 33311
Nick G.
Nick G. Checked in
1)-----Remove hardware in 200 amp main lug panel of master bathroom and convert panel into junction box. 2)-----Extend all circuits from junction box to right of panel and opposite side of wall as to flip new panel to be installed. 3)-----Install new 200 amp GE brand 40 circuit main lug panel. 4)-----Label, rough patch and clean area. 5)-----Pull permit and get inspection. **THERE ARE NO SIGNS OF CLOTH WIRING IN THE UNIT** NOTE: HOME INSPECTOR FLAGGED PANEL FOR CLOTH WIRING. THE WIRE THAT WAS USED IS NOT CONSIDERED CLOTH WIRING. IT HAS CLOTH SHEATHING WITH RUBBER INSULATION AROUND THE WIRE WHICH IS NOT A FIRE HAZARD.
Fort Lauderdale, FL 33304
Earl C.
Earl C. Checked in
As per David because of old quote. $70.00
Fort Lauderdale, FL 33315
Jason B.
Jason B. Checked in
Supply and install (4) T8 4 lamps ballasts
Fort Lauderdale, FL 33312
Nick G.
Nick G. Checked in
1)-----Extend circuit from exsitng outlet in guest room #3 of lower bedroom floor to approximately 6 ft above outlet. 2)-----Install cut in remodel box and extend circuit to other side of wall into livng room area. 3)-----Install wire mold round junction box. 4)-----Extend circuit using wire mold from wire mold junction box to 2 other locations where wire mold junction boxes are to be installed to get to upstairs bedroom. 1 at bottom of stairs and 1 at top of stairs. 5)-----Extend circuit using wire mold from upstairs junction box into upstairs bedroom. 6)-----Install round wire mold junction box in upstairs bedroom. 7)-----Install 4 hardwired smoke detectors with 10 year lithium battery backup. 1 in downstairs bedroom, 1 outside downstairs bedroom, 1 outside upstairs bedroom and 1 in upstairs bedroom. CHANGE ORDER FOR ADDITIONAL WORK: 1)-----Extend circuit using wire mold from wired mold junction box by stairs to right end of home into guest room #2. 2)-----Install round wire
Fort Lauderdale, FL 33305
Nick G.
Nick G. Checked in
1)-----Run dedicated 15 amp circuit using 12-2 Romex from main lug panel in office to first location of smoke detector to be installed in bedroom of office. 2)-----Loop circuit to to other locations in office( office room and living area) and then bring circuit to exterior wall and install weather proof junction box. 3)-----Run 1/2 inch PVC from junction box around building to outside of media room and install another weather proof junction box. 4)-----Extend circuit using 12-2 romex from the junction box into media room where smoke detector is to be installed. 5)-----Extend circuit from junction box at media room location using 1/2 inch pvc to first bottom floor unit and install weather proof junction box. 6)-----Extend circuit using 12-2 Romex from junction box into first bottom floor unit where smoke detector is to be installed. 7)-----Loop circuit using 12-2 Romex in bottom floor attic to 2 other units where smoke detectors are to be installed. 8)-----Extend circuit from las
Fort Lauderdale, FL 33311
Jason B.
Jason B. Checked in
Diagnosis level 2. Outlets not working
Fort Lauderdale, FL 33315
Jason B.
Jason B. Checked in
Supply and replace (2) T8 4 bulbs ballast
Fort Lauderdale, FL 33312
Phil G.
Phil G. Checked in
Switched hot wire for switch leg
Fort Lauderdale, FL 33312
Phil G.
Phil G. Checked in
Install dining room basic track light
Fort Lauderdale, FL 33304
Phil G.
Phil G. Checked in
Install (12) customer supplied switches Install (2) customer supplied fans Install (1) customer supplied track lights
Fort Lauderdale, FL 33304
Nick G.
Nick G. Checked in
1)-----Remove 2 2*2 grid ceiling LED layin lights. 2)-----Supply and install 2 new 2*2 grid ceiling LED layin lights.
Fort Lauderdale, FL 33309